IT | EN | JP #MadeOfStars #Torino2019

Senior Ladies Spin Combination Requirements At Torino 2019

At the ISU Grand Prix of Figure Skating Final in Turin, senior ladies were required to complete a demanding short-program spin combination alongside the jump elements and other prescribed spins. The event took place at Palavela from 5–8 December 2019, bringing the leading Senior and Junior competitors together for one of the most closely judged competitions of the season.

For skaters, the combination was more than a sequence of attractive positions. It had to satisfy specific requirements for foot changes, basic positions, revolutions and technical control. Understanding those details helps spectators, developing skaters and Australian coaches follow why a spin earns a high level, receives a lower grade of execution, or is marked as incomplete.

The Place Of The Combination In The Short Program

The senior ladies short program contained seven required elements: three jump elements and three spins, with the remaining element being the step sequence. The spin combination was one of the three prescribed spins and was expected to demonstrate control across different positions and both feet.

The other spins had separate identities. One was a flying spin without a change of foot, while another was a layback or sideways-leaning spin. The combination therefore did not have to be a second layback. It could use upright, sit and camel positions, provided it met the specific combination rules.

This distinction matters when watching a competition replay. A skater may use a layback variation inside the combination, but the element is judged as a spin combination rather than as the designated layback spin. The technical panel looks first for the required structure before awarding difficulty features.

The Essential Technical Requirements

The spin combination had to include a change of foot and at least one change of position. It also needed to contain at least two basic positions. The recognised basic positions are upright, sit and camel. A variation that does not clearly belong to one of these categories may add visual interest without satisfying the basic-position requirement.

The minimum total was eight revolutions. The revolutions could be distributed between the two feet and the different positions, but each basic position used to meet the requirement had to be held for at least two revolutions. A skater could include more than two basic positions, although extra positions had to be completed without losing balance, speed or clarity.

A practical example might begin with a camel position on the first foot, change to a sit position, transfer to the second foot, and finish in an upright variation. That structure can satisfy the main requirements if the changes are clear and the total revolution count reaches eight. The exact order is not prescribed, so choreographers can choose an arrangement that suits the skater’s strengths.

Understanding Positions And Changes

A basic position is defined by the relationship between the body and the skating leg. In a camel spin, the torso is approximately horizontal and the free leg is extended. In a sit spin, the skating knee is deeply bent and the body is low. An upright spin keeps the torso generally vertical, even when the free leg, arms or upper body create a difficult variation.

A position change must be recognisable rather than a brief accidental movement. Moving from a camel to a sit, for example, requires a clear transition into the new shape. A skater who appears to pass through a position for less than the required number of revolutions may receive credit for a variation or transition, but not necessarily for fulfilling the combination’s basic-position requirement.

The change of foot also needs to be distinct. It can be performed through a step, a jump or another permitted transfer, depending on the construction of the spin. The skater must continue spinning rather than simply stepping out and restarting. A poorly controlled transfer can reduce the grade of execution even when the technical panel recognises that a change of foot took place.

Counting Revolutions And Avoiding Invalid Features

Revolution counting is one of the most important details in this element. The technical panel counts completed revolutions, not merely the time spent rotating. A skater may appear to hold a position for a long moment, but if the edge slips, the rotation pauses or the body shape is unclear, the required count may not be achieved.

The two basic positions used to satisfy the rule each need at least two revolutions. The whole element must reach eight revolutions in total. Coaches therefore build in a margin rather than choreographing exactly eight rotations. A rushed final position, a loss of speed or an early exit can turn a seemingly complete combination into an under-rotated or incomplete element.

A flying entry is not a substitute for a required basic position. Likewise, a difficult arm position or unusual leg shape does not automatically count as a second basic position. The position has to be recognisable under the ISU definitions. This is why technical specialists can reach a different result from a casual viewer watching a fast combination.

The element can also be affected by falls, interruptions and illegal movements. A fall may produce a negative grade of execution, while a missing requirement can affect the element’s base value or technical classification. The precise penalty depends on the applicable season’s regulations and the nature of the error.

How Levels And Grades Are Awarded

Once the spin combination meets its basic requirements, the technical panel assesses features that can raise its level. These may include difficult variations, a difficult entry, a difficult change of foot, a clear change of edge, an unusual exit or sustained speed. A feature must be executed clearly; simply attempting a difficult movement does not guarantee credit.

The level reflects the number and quality of recognised features, subject to the maximum level allowed for the short program. A level-four combination is not automatically the best-scoring spin. Grade of execution also matters, because speed, centring, clean positions, control and musical connection affect the final value.

Judges assess whether the spin travels across the ice, loses speed, wobbles during a change or finishes abruptly. They also consider whether the variations are genuinely difficult and well controlled. A simpler combination with strong centring and excellent speed can compare favourably with a more ambitious combination that contains visible mistakes.

For viewers following the Torino results, the protocol provides useful information. The element code identifies the spin combination and its level, while the judges’ grades show how effectively it was performed. This separates the technical question of “what was included?” from the performance question of “how well was it skated?”

Reading The Element From Australia

Australian viewers often experience major European skating events at inconvenient local times. In December, Turin is nine or ten hours behind Australian eastern cities, depending on daylight-saving arrangements. A live session in the evening in Italy may appear in the early morning in Sydney or Melbourne, while Brisbane, Adelaide and Perth follow different local conversions.

That timing has a practical effect on analysis. A viewer watching a replay before work in Melbourne or Sydney may want to pause the element and count the revolutions, while someone in Perth may see the session at a more manageable hour. Slow-motion video is useful, but it can make a position look longer than it was, so the official protocol remains the better reference for the final result.

Training conditions also differ. Australian skaters commonly share limited rink time in cities such as Melbourne, Sydney, Brisbane and Adelaide, with lessons, public sessions and club ice competing for availability. A coach may therefore use a short practice block to prioritise a clean change of foot and two secure basic positions before adding advanced features.

Feature What the skater must show What Australian viewers can watch for
Change of foot A clear transfer from one skating foot to the other Does the skater keep rotating through the transfer?
Basic positions At least two of upright, sit or camel Are both positions recognisable and held for two revolutions?
Total rotations At least eight completed revolutions Does the spin continue long enough after the final change?
Change of position A distinct move between recognised positions Is the new body shape clear rather than momentary?
Technical quality Centring, speed, control and clean exits Does the spin stay in place and finish confidently?

Ticketing and event access also have a local legal angle for Australians planning to attend an overseas competition. The Australian Consumer Law generally applies to purchases from Australian businesses, but tickets sold directly by an Italian organiser are primarily governed by the seller’s terms and applicable Italian rules. Checking the official Torino event information, refund conditions and authorised sales channel is safer than relying on an unverified resale listing.

A Practical Viewing And Training Checklist

The following points provide a concise way to analyse the senior ladies combination, whether the footage comes from the Palavela event archive or a current domestic competition. Rules can change between seasons, so the relevant ISU communication should always be checked when applying the method to a later event.

For Australian club skaters, this checklist can be adapted to a rink-side training session. A coach might record the combination from the side, review the foot change frame by frame and then repeat it without video. That approach is particularly useful when limited ice availability makes every repetition important, as is common in busy metropolitan rinks.

The 2019 Torino regulations belong to a specific skating season, so current competitors should not assume every detail remains identical. The structure of the short program, permitted features and judging communications may be updated by the ISU. For historical analysis, however, the essential focus remains clear: a senior ladies spin combination needed a change of foot, a change of position, at least two basic positions and eight revolutions, all delivered with control.

Use the official Torino 2019 schedules, results and event materials alongside competition footage to identify the element in context. Comparing the protocol with the visible skating makes the technical requirements easier to understand and reveals how precision turns a required spin into a high-scoring performance.